MS16627C
REQUIREMENTS:
1. CLASSIFICATION: RETAINING RINGS FURNISHED UNDER THIS STANDARD SHALL BE TYPE 1, CLASS 3 OF THE PROCUREMENT SPECIFICATION.
2. MATERIAL: CARBON SPRING STEEL,GRADE 1060 THRU 1095 (UNS G10600 THRU G10950) IN ACCORDANCE WITH ASTM A568/A568M OR ASTM A684/A684M.
CORROSION RESISTANT STEEL IN ACCORDANCE WITH AMS 5520 (UNS S15700).
BERYLLIUM COPPER, ALLOY NUMBER 170 (UNS C17000) OR ALLOY NUMBER 172 (UNS C17200) IN ACCORDANCE WITH ASTM B194.
3. HARDNESS
TABLE II. HARDNESS.
0HOUSING (REF) |
CARBON STEEL |
CORROSION RESISTANT STEEL |
BERYLLIUM COPPER |
.750 .812 & .875 938 TO 1.500 INCL 1.562 TO 2.000 INCL 2.062 TO 3.000 INCL 3.156 TO 4.000 INCL |
85.5 -88 HR15N (50-55 HRC EQUIV) 1/ 66.5 -71 HR30N (48-53 HRC EQUIV) 1/ 52.5 -58.5 HR45N (48-53 HRC EQUIV) 1/ 46-51 HRC 46-51 HRC 44-49 HRC |
82.5-86 HR15N (44-51 HRC EQUIV) 1/ 63-69.5 HR30N (44-51 HRC EQUIV) 1/ 48-56 HR45N (41-51 HRC EQUIV) 1/ 44-51 HRC 44-51 HRC 44-51 HRC |
79-82 HR15N (37-43 HRC EQUIV) 1/ 56.5 -62 HR30N (37-43 HRC EQUIV) 1/ 39.5-47 HR45N (37-43 HRC EQUIV) 1/ 37-43 HRC |
1/ USE HIGHEST SCALE TO PROVIDE SECTION WIDTH EQUAL TO OR GREATER THAN 5 TIMES THE BRAILE IMPRESSION DIAMETER.
4. PROTECTIVE FINISH OR TREATMENT:
a. CARBON STEEL - SHALL BE AS SPECIFIED (SEE TABLE III OR IV):
1. CADMIUM PLATE IN ACCORDANCE WITH SAE AMS-QQ-P-416, TYPE II, CLASS 3 OR ASTM B696, TYPE II, CLASS 5.
2. ZINC COAT IN ACCORDANCE WITH ASTM B633, TYPE II, CLASS Fe/Zn 5 OR ASTM B695, TYPE II, CLASS 5.
3. PHOSPHATE COAT IN ACCORDANCE WITH MIL-DTL-16232, TYPE Z, CLASS II.
b. CORROSION RESISTANT STEEL - SHALL BE CLEANED, DESCALED AND PASSIVATED IN ACCORDANCE WITH SAE AMS2700.
5. PART NUMBER: THE BASIC MS PART NUMBER IS FOLLOWED BY A DASH NUMBER TAKEN FROM TABLE III OR IV.
EXAMPLE: MS16627-1100 IS THE PART NUMBER FOR A CARBON STEEL, CADMIUM PLATED, INTERNAL, INVERTED RETAINING RING FOR USE IN A 1.000 HOUSING DIAMETER.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business