MIL-DTL-10884H
2.2 Non-Government publications. Unless otherwise specified, issues of referenced
documents are those in effect at the time of solicitation. Information regarding the latest issue of
non-government documents not adopted by the government can be obtained from the
organization responsible for their publication. (see 6.2)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive
Screws
(Application for copies should be addressed to ASME International, Three Park Avenue, New
York, NY 10016-5990.)
ASTM INTERNATIONAL
ASTM A109
Steel, Strip, Carbon, Cold-Rolled
ASTM A366
Steel, Sheet, Carbon, Cold-Rolled, Commercial Quality
ASTM B36
Brass Plate, Sheet, Strip and Rolled Bar
ASTM B134
Standard Specification for Brass Wire
ASTM B154
Copper and Copper Alloy Mercourous Nitrate Test
ASTM D498
Soap, Powdered (Nonalkiline Soap Powder)
ASTM D523
Test for Specular Gloss
ASTM F1135
Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
ASTM F1470
Standard Guide for In-Fastener Sampling for Specified Mechanical
Properties and Performance Inspection
(Application for copies should be addressed to ASTM INTERNATIONAL, 100 Barr Harbor Drive,
West Conshohocken, PA 19428-2959 or email https://www.astm.org.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-QQ-C-320
Chromium Plating (Electrodeposited)
SAE-AMS-QQ-N-290
Nickel Plating (Electrodeposited)
(Applications for copies should be addressed to the Society of Automotive Engineers, 400
Commonwealth Drive, Warrendale, PA 15096-0001) or https://www.sae.org
(Non-government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available
through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document will take precedence. Nothing in this document,
however, supercedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Materials and components. Materials and components shall conform to the requirements
specified herein. Materials and components not definitely specified shall be of the quality
normally used by the manufacturer provided the completed item complies with all provisions of
this specification. It is encouraged that recycled material be used when practical as long as it
meets the requirements of this specification.
3.1.1 Brass. Sheet and strip brass shall conform to copper alloy (UNS C26000) of ASTM B36
and shall be of the temper shown on the drawing. Brass wire shall be round and conform to
copper alloy UNS C26000 or ASTM B134 and shall be of the temper shown on the drawing.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business