MIL-DTL-10884H
3.2.3.2 Style 2 and 2A. Unless otherwise specified (see 6.2), style 2 and 2A fasteners shall
be either construction A, B, C, D or E at the option of the contractor. Style 2 and 2A fasteners
shall consist of two separate components that constitute the female half of the fasteners and two
separate components that constitute the male half of the fasteners, except that where the
application required a reversible fastener the stud-eyelet combination shall be furnished in which
case, the stud-eyelet combination shall constitute the male half of the fastener and the socket the
female half.
3.2.3.2.1 Female components, style 2 and 2A. The style 2 and 2A female components shall
be of the following buttons and sockets, as specified (see 6.2):
Style 2
a. Button, 24 ligne size, size 1 or 2
b. Button, 36 ligne size
c. Socket
Style 2A
a. Button, size 1, 2 or 3.
b. Socket
3.2.3.2.2 Male components, style 2 and 2A. The style 2 and 2A male components shall be of
the following stud and eyelet sizes or stud-eyelet combinations, as specified (see 6.2):
Style 2
a.
Stud
b.
Eyelet, size 1, 2 or 3
c.
Stud, machine screw base (No. 8 32UNC 2A), size 1, 2, 3 or 4
d.
Stud, wood screw base
e.
Stud, self-tapping screw base, size 1 or 2
f.
Stud-eyelet combination, size 1 or 2
g.
Washer (for applications with 36 ligne is used)
Style 2A
a. Stud
b. Eyelet, size 1, 2, or 3
3.2.3.3 Style 3. Unless otherwise specified (see 6.2), style 3 fasteners shall be either
construction A, B, C or D, at the option of the contractor. Style 3 fasteners shall consist of four
separate components: pronged ring, socket, stud and eyelet. Reversible stud for use with
construction B, C and D components shall be furnished only when specified (see 6.2).
Reinforced socket for use with construction A components (in lieu of regular socket) shall be
furnished only when requested.
3.2.3.4 Style 4. Unless otherwise specified (se 6.2), style 4 fasteners shall be either
construction A, B, or C at the option of the contractor. Style 3 fasteners shall consist of four
separate components: button, socket, stud and eyelet or eyelet with threaded insert, as specified
(see 6.2).
3.3 Stress corrosion cracking. Brass snap fastener components in the half-hard or harder
temper shall be free from stress corrosion cracking when tested as specified in 4.3.2.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business