MS90707 Ring, Retaining, External Grip

Pages 1 - 2 - 3 - 4 - 5 - 6

MS90707C

TABLE IV. SUBSTITUTION TABLE, CROSS REFERENCE OF PART NUMBERS

0 S SHAFT (REF)	INACTIVE	SUBSTITUTE	SUBSTITUTE	SUBSTITUTE
	CARBON STEEL	1/ CARBON STEEL CADMIUM PLATE	1/ CARBON STEEL ZINC COAT	1/ CARBON STEEL PHOSPHATE COAT
	MS90707	MS90707	MS90707	MS90707
.094 .125 .156 .187 .250 .313 .376 .437 .500 .625 .750	-9 -12 -15 -18 -25 -31 -37 -43 -50 -62 -75	-1009 -1012 -1015 -1018 -1025 -1031 -1037 -1043 -1050 -1062 -1075	-2009 -2012 -2015 -2018 -2025 -2031 -2037 -2043 -2050 -2062 -2075	-3009 -3012 -3015 -3018 -3025 -3031 -3037 -3043 -3050 -3062 -3075

1/ SUBSTITUTE CORROSION RESISTANT STEEL WHEN USED IN FOOD PROCESSING MACHINERY, OR IN FUEL OR LUBRICATION SYSTEMS, OR WHEN USED AT TEMPERATURES OVER 450°F (233°C).

NOTES:

1. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES.

2. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS STANDARD AND THE REFERENCES CITED HEREIN, THE TEXT OF THIS STANDARD SHALL TAKE PRECEDENCE.

3. RECOMMENDED DESIGN LIMITATIONS AND USAGE.

(a) INTENDED USE- TO PROVIDE SHOULDERS FOR POSITIONING AND RETAINING MACHINE COMPONENTS ON UNGROOVED SHAFTS, TUBES, BOSSES, STUDS, ETC. FRICTION FORCE CAUSED BY HEAVY SPRING PRESSURE OF RING ON SHAFT MAKES FASTENER SECURE AGAINST AXIAL DISPLACEMENT FROM EITHER DIRECTION UNDER MODERATE THRUST OR VIBRATION. THE RINGS ARE ADJUSTABLE ON THE SHAFT AND ARE RE-USABLE FOLLOWING DISASSEMBLY (SEE WARNING NOTE BELOW). THE RINGS WILL WITHSTAND HIGH ROTATIONAL SPEEDS.

LIMITATION ON USE- THE FOLLOWING FORMULAS ARE NOT TO BE USED FOR BRITTLE MATERIALS SUCH AS CAST IRON, ETC.

WARNING - RINGS SHOULD NOT BE OVER EXPANDED DURING INSTALLATION SINCE THIS WILL LEAD TO RING FAILURE. RINGS SHOULD ONLY BE EXPANDED TO GLIDE SMOOTHLY OVER THE SHAFT.

FOR APPROXIMATE SAFETY RPM LIMITS SEE TABLE V.

Source: https://assist.dla.mil -- Downloaded: Check the source to verify that 4this is the current version before use.