MS90707C
(g) LOAD CAPACITY, WITH THE RETAINED PART RADIUSED OR CHAMFERED IS THE SAME AS THE LOAD CAPACITY OF RINGS ABUTTING COMPONENTS WITH SHARP CORNERS AND IS SPECIFED IN TABLE VII BELOW.
TABLE VII. LIMIT LOADS. 1/
|
NOMINAL RING SIZE |
ALLOWABLE THRUST LOAD FOR RING ASSEMBLIES WITHOUT GROOVE, RETAINED PART SHARP CORNERED RADIUSED OR CHAMFERED |
|
CARBON STEEL OR CORROSION RESISTANT STEEL |
BERYLLIUM COPPER |
|
|
.094 .125 .156 .187 .250 .313 .376 .437 .500 .625 .750 |
8 LB 10 LB 12 LB 20 LB 23 LB 25 LB 30 LB 40 LB 45 LB 60 LB 65 LB |
6 LB 8 LB 9 LB 15 LB 17 LB 19 LB 23 LB 30 LB 32 LB 45 LB 47 LB |
1/ LOAD VALUES ARE BASED UPON THE RING INSTALLED ON A SOFT LOW CARBON STEEL SHAFT. FOR HARDENED SHAFTS (50 HRC MIN) THE ALLOWABLE LOAD SHOULD BE REDUCED BY 50 PERCENT.
4. CHANGES FROM PREVIOUS ISSUE. MARGINAL NOTATIONS ARE NOT USED IN THIS REVISION TO IDENTIFY CHANGES WITH RESPECT TO THE PREVIOUS ISSUE DUE TO THE EXTENT OF THE CHANGES.
MILITARY INTEREST
Custodians: Preparing activity: Army - AR DLA - IS
Navy - OS
Air Force - 99 (Project 5325-2012-017)
Review activities:
Army - AT, AV, GL, MI Air Force - 71
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.dla.mil.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business