MIL-DTL-27426C
4.2.4.3 Protective finish. When retaining rings are furnished with a
plating or coating (see 3.3), the thickness of the plating or coating shall be
determined in accordance with the applicable plating or coating specification.
5.
PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall
be as specified in the contract or order (see 6.2). When actual packaging of
material is to be performed by DoD personnel, these personnel need to contact the
responsible packaging activity to ascertain requisite packaging requirements.
Packaging requirements are maintained by the Inventory Control Point's packaging
activity within the Military Department of Defense Agency, or within the Military
Department's System Command. Packaging data retrievals available from the
managing Military department's of Defense Agency's automated packaging files, CD-
ROM products or by contacting the responsible packaging activity.
6.
NOTES
6.1 Intended use. Retaining rings covered by this specification are
intended for internal and external retaining applications, such as positioning
and retaining bearings and springs in housings and on shafts, and for retaining
shafts in housings.
6.2 Acquisition requirements .
Acquisition documents must specify the
following:
a.
Title, number and date of this inspection.
b.
Type, material, and size of rings (see 1.2.3.1 and 3.4).
c.
Issue of DoDISS to be cited in the solicitation, and if required, the
specific issue of individual documents referenced (see 2.1 and 2.2).
d.
Protective finish required (see 3.3).
e.
Levels of preservation and packaging required (see 5.1).
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business