INCH-POUND
MIL-DTL-22529D(AS)
6 June 1996
SUPERSEDING
MIL-DTL-22529C(AS)
8 September 1995
DETAIL SPECIFICATION
GROMMET, EDGING
This specification is approved for use by the Department of
the Navy and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers three types of edging
grommets; a plastic caterpillar style applied with an adhesive, and two
spring-style, stainless steel based composite grommets requiring no
adhesives. Edging grommets are used to provide abrasion protection of
electrical current carrying wires and cable bundles routed through metal
structures.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents in other sections of this specification or recommended for
additional information or as examples. While every effort has been made
to ensure the completeness of this list, document users are cautioned
that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards and handbooks. The following
specifications, standards and handbooks form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of
these documents are those listed in the issue of the Department of
Defense Index of Specifications and Standards (DODISS) and supplement
thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: the Defense Industrial Supply Center, 700 Robbins Avenue,
DISC-EED, Philadelphia, PA
19111-5096 by using the self addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing
at the end of this document or by letter.
AMSC N/A
FSC 5325
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business